How to Handle Storm Damage to Your Roof

A heavy storm can leave a roof looking battered. Slate tiles may be cracked or missing, flashing around a chimney might be loose, and guttering can pull away from the roofline. Water finds the smallest gap, so a storm-damaged roof often turns into a roof leak within hours. Acting quickly and methodically can keep a bad situation from becoming worse. Here is a practical, step-by-step guide on what to do after storm damage to a roof, with things to watch at each stage.

1. Stay Safe First

Before you look at the roof itself, make sure everyone in the house is safe. If there are loose tiles or debris in the garden or on the driveway, keep children and pets away from that area. A falling tile can cause serious injury. If water is already coming through the ceiling, place a bucket or container under the drip and move furniture out of the way. If the leak is near any electrical fittings or lights, switch off the power to that circuit at the consumer unit and do not touch anything until the area is dry. Water and electricity are a dangerous combination.

Do not climb onto the roof after a storm. Wet surfaces, loose slates and hidden damage make it extremely unsafe. A proper inspection needs to be done from a ladder on stable ground or by a professional who has the right equipment. Safety comes before anything else.

2. Contain the Water Inside

Once you have taken care of immediate safety, your next priority is stopping water from spreading through the house. If the ceiling is bulging under the weight of trapped water, carefully pierce the centre of the bulge with a screwdriver to let the water drain into a bucket. This may sound counterintuitive, but a bulging ceiling can collapse and cause far more damage. Let the water out in a controlled way, then keep emptying the bucket until the roof can be repaired.

If you have access to the loft or attic, check for wet insulation and any pooling water. Move belongings away from the affected area. A dry towel or an old sheet placed under the leak can help absorb water and protect the floor below.

3. Carry Out a Ground-Level Roof Inspection

From the ground, using binoculars if you have them, look at the roof for obvious damage. Check for missing or displaced roof tiles and slate tiles. Look at the flashing around the chimney and any roof valleys - these are common points where leaks start after a storm. Inspect the guttering for sagging sections or blockages caused by fallen leaves and debris. Also check the ridges and the edges of the roof for any lifted material.

Make a note of what you see. Take photos from the ground if you can. These will be useful when you speak to a contractor. Do not walk around on the roof or lean out of upstairs windows to get a better view. A ground-level survey gives you a good idea of the scale of the problem without putting anyone at risk.

4. Make Temporary Repairs if It Is Safe

If the damage is small and you can reach it safely from a ladder on firm, level ground, you can make a temporary fix to stop water getting in. A tarpaulin securely tied over the damaged area can work as a short-term cover. Do not use nails or screws into the roof covering - weigh the tarp down with sandbags or heavy objects from inside the loft if possible. For a slipped tile, you may be able to push it back into place from a ladder, but only if the ladder is stable and someone else is holding it. Never work on a wet or windy day.

Anything beyond a simple, ground-based fix is best left to a professional. Temporary repairs are exactly that - they buy you time, not a permanent solution. The goal is to keep the interior dry until a proper repair can be carried out.

5. Document the Damage for Insurance

Most home insurance policies cover storm damage to the roof, but you will need evidence. Take clear photos of the damage from the ground and of any water damage inside the house. Write down the date and time of the storm. Keep any receipts for temporary repairs - tarpaulin, buckets, contractor call-out fees - as these may be claimable. Contact your insurer as soon as possible. Many have a 24-hour claims line. They will tell you what they need and whether they have preferred repairers or if you can choose your own.

Do not start major repairs before the insurer has seen the damage or given you permission. If you carry out permanent work before the claim is agreed, you may invalidate it. Check with them first. They often want to send a loss adjuster to inspect the roof before any work begins.

6. Arrange a Professional Roof Inspection

A professional roof inspection is the only way to find hidden damage. Slate tiles can be cracked without being displaced. Flashing can be lifted without being obvious from the ground. The structure itself - rafters, battens, underlay - may have been weakened by the storm or by water that got in through a small gap. A qualified roofer will check all of these things and give you a clear assessment of what needs to be done.

When you contact a company, ask for a written estimate that lists the work and the materials. A good contractor will explain the repairs in plain language and tell you what they will do and what they will not do. They should also tell you about any lead times - after a storm, many households need repairs, so there may be a waiting list. Be patient but stay on top of the booking. If you have a serious leak, explain that when you call.

If you need advice on what to look for in a contractor, roof repair services can vary in quality and scope, so it pays to ask questions. A reputable company will be happy to explain their process and give you a clear timeline.

7. Understand the Scope of Repairs

Storm damage may affect only a few tiles, or it could involve the flashing around a chimney, sections of guttering, and the underlay beneath the tiles. The repairer should explain exactly what they plan to replace and why. For example, if the underlay is wet or torn, simply replacing the tiles on top will not solve the leak. The water will still find its way through.

Ask about matching materials. If your roof uses slate tiles that are no longer made, the contractor may need to source reclaimed slates or use a close match. This matters for the look of the roof and for its long-term performance. A professional roofer will be able to advise on the best approach.

Be clear about what is included in the price. Does the estimate cover removing and disposing of old materials? Does it include new flashing or guttering if those are damaged? Getting these details in writing avoids misunderstandings later.

8. Plan for the Long Term

Once the immediate repairs are done, think about whether the roof as a whole is nearing the end of its service life. A storm can expose weaknesses that were already there. If your roof is old, the damage may be a sign that a full replacement is on the horizon. A good roofer will be honest about whether it makes more sense to patch the damaged area or to plan for a larger project down the line.

If you decide to replace the whole roof, you will need to budget and plan carefully. The same contractor who did the storm repairs may be the best person to do the full job - they already know your roof and its condition. Regular maintenance after the repair - clearing gutters, checking for loose tiles after high winds, and inspecting flashing once a year - can help prevent future storm damage from becoming a major problem.

Taking care of a storm-damaged roof is not just about fixing the leak. It is about understanding what caused it and making sure the whole roofing system is sound. If you choose to work with a company that provides roof repair services, make sure they are experienced, insured, and willing to explain their work. A little care at the start saves you from repeat call-outs and more water damage later.